Locking the vehicle with exterior perimeter monitoring only

Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as:

- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your vehicle.

Deactivation of the interior volumetric monitoring

Switch off the ignition.

Switch off the ignition.
Within ten seconds, press the button until the indicator lamp is on continuously.

Get out of the vehicle.

Get out of the vehicle.
Press the locking button on the remote control immediately.

The exterior perimeter monitoring alone is activated: the indicator lamp in the button flashes once per second.

To be effective, this deactivation must on the remote control. be carried out each time the ignition is switched off.

Reactivation of the interior volumetric monitoring

button on the remote control to deactivate the exterior perimeter monitoring.Press the unlocking button on the remote control to deactivate the exterior perimeter monitoring.

 

on the remote control to activate all the monitoring functions.Press the locking button on the remote control to activate all the monitoring functions.

 

the button again flashes once per second.The indicator lamp in the button again flashes once per second.

 

    See also:

    Centre armrest
    Comfort and storage system for the driver and front passenger. Storage For access to the closed storage box, lift the lever to open the lid. For access to the open storage box below the armrest ...

    Fuel tank
    Capacity of the tank: approximately 60 litres. Low fuel level When the low fuel level is reached, this warning lamp comes on in the instrument panel, accompanied by an audible signal and a messa ...

    Total distance recorder
    System which measures the total distance travelled by the vehicle during its life. The total and trip distances are displayed for thirty seconds when the ignition is switched off, when the driv ...