Automatic adjustment of xenon headlamps
In order to avoid causing a nuisance to other road users, this system corrects the height of the xenon headlamp beams automatically and when stationary, in relation to the load in the vehicle.
If a malfunction occurs, this warning lamp is displayed on the instrument panel, accompanied by an audible signal and a message in the screen.
The system then places your headlamps in the lowest position.
Do not touch the xenon headlamp bulbs.
Contact a PEUGEOT dealer or a qualified workshop.
See also:
Stop & start
The Stop & Start system puts the engine temporarily on standby - STOP mode -
during stops in the traffic (red lights, traffic jams, or other...). The engine
restarts automatically - START mode ...
Manual guide-me-home lighting
Temporarily keeping the dipped beam headlamps on after the vehicle's ignition
has been switched off makes the driver's exit easier when the light is poor.
Switching on
With the ignition ...
Leaving cruise control mode
Turn thumb wheel 1 to the "0" position: the cruise control mode is deselected.
The display returns to the distance recorder.
...