Failure of the remote control

To deactivate the monitoring functions:

  • Unlock the vehicle using the key in the driver's door lock.
  • Open the door; the alarm is triggered.
  • Switch on the ignition; the alarm stops. The indicator lamp in the button goes off.

Locking the vehicle without activating the alarm

Lock or deadlock the vehicle using the key in the driver's door lock.

Malfunction

When the ignition is switched on, fixed illumination of the indicator lamp in the button indicates a malfunction of the system. Have it checked by a PEUGEOT dealer or a qualified workshop.

Automatic activation

2 minutes after the last door or the boot is closed, the system is activated automatically.

To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control.

    See also:

    Rear screen demist - defrost
    The control button is located on the heating or air conditioning system control panel. Switching on The rear screen demisting/defrosting can only operate when the engine is running. Press this ...

    Opening
    Open the left hand front door. Pull the release lever, located at the bottom of the door aperture, towards you. Lift the safety catch and raise the bonnet. Do not open the bonnet under ...

    Running out of fuel (diesel)
    On vehicle fitted with HDi engines, the fuel system must be primed if you run out of fuel; refer to the corresponding engine compartment view. 1.6 litre HDi engine Fill the fuel tank with at lea ...