Speed limiter

System which prevents the vehicle from exceeding the speed programmed by the driver.

When the programmed speed limit is reached, pressing the accelerator pedal no longer has any effect.

The speed limiter is switched on manually:

it requires a programmed speed of at least 20 mph (30 km/h).

The speed limiter is switched off by manual operation of the control.

The programmed speed can be exceeded temporarily by pressing the accelerator firmly.

To return to the programmed speed, simply slow down to a speed below the programmed speed.

The programmed speed remains in the memory when the ignition is switched off.

circumstances, replace the need to respect speed limits, nor can it replace the The speed limiter cannot, in any circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver.

Steering mounted controls

The controls of this system are grouped together on stalk A .

The controls of this system are grouped together on stalk A .

1. Speed limiter mode selection dial
2. Value decrease button
3. Value increase button
4. Speed limiter on / off button

Displays in the instrument panel

The programmed information is grouped together on the instrument panel screen.

The programmed information is grouped together on the instrument panel screen.

5. Speed limiter on / off indication
6. Speed limiter mode selection indication
7. Programmed speed value

Programming

Turn dial 1 to the "LIMIT" position:

Turn dial 1 to the "LIMIT" position:

the speed limiter mode is selected but is not switched on (OFF).

You do not have to switch the speed limiter on in order to set the speed.

Set the speed value by pressing button 2 or 3 (e.g.: 55 mph (90 km/h)).

Set the speed value by pressing button 2 or 3 (e.g.: 55 mph (90 km/h)).

You can then change the programmed speed using buttons 2 and 3 :

- by + or - 1 mph (km/h) = short press,

- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.

Switch the speed limiter on by pressing button 4 .

Switch the speed limiter off by pressing button 4 : the display confirms that

Switch the speed limiter off by pressing button 4 : the display confirms that it has been switched off (OFF).

Switch the speed limiter back on by pressing button 4 again.

Switch the speed limiter back on by pressing button 4 again.

Exceeding the programmed speed

Pressing the accelerator pedal to exceed the programmed speed will not have any effect unless you press the pedal firmly past the point of resistance .

The speed limiter is deactivated temporarily and the programmed speed, which is still displayed, fl ashes.

Returning to the programmed speed, by means of intentional or unintentional deceleration

Returning to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashing of the programmed speed.

Return to normal driving

Turn dial 1 to the "0" position: the speed limiter mode is deselected. The display returns to the distance recorder.

Operating fault

In the event of a speed limiter malfunction, the speed is cleared resulting in flashing of the dashes.

Have it checked by a PEUGEOT dealer or a qualified workshop.

On a steep descent or in the event

of sharp acceleration, the speed limiter will not be able to prevent the vehicle On a steep descent or in the event of sharp acceleration, the speed limiter will not be able to prevent the vehicle from exceeding the programmed speed.

To avoid any risk of jamming of the pedals:

- ensure that the mat is positioned correctly,
- do not fit one mat on top of another.

    See also:

    Towing the vehicle (308 saloon)
    Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Access to the tools The towing eye is installed in the boot under the floor. To gain access ...

    Storage drawer
    The storage drawer is located under the front passenger's seat. Opening Raise the front of the drawer and pull it. Removal Bring the drawer to the end of its travel. Press the ends of the s ...

    Manual air conditioning
    The heating / ventilation or air conditioning systems can only operate with the engine running. 1. Temperature adjustment Turn the dial from blue (cold) to red (hot) to adjust the temperature ...