Bonnet

Opening

bonnet, switch off the Stop & Start system to avoid any risk of injury resulting Before doing anything under the bonnet, switch off the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode.

Open the front left door.

Open the front left door.

Pull the interior bonnet release lever A , located at the bottom of the door aperture.

Push the exterior safety catch B to the left and raise the bonnet.

Push the exterior safety catch B to the left and raise the bonnet.

Unclip the stay C from its housing.

Unclip the stay C from its housing.

Fix the stay in the notch to hold the bonnet open.

release lever prevents opening of the bonnet while the front left door is closed. The location of the interior bonnet release lever prevents opening of the bonnet while the front left door is closed.

winds. Do not open the bonnet in high winds.

When the engine is hot, handle the exterior safety catch and the bonnet stay with care (risk of burns).

Closing

Take the stay out of the support notch.

Clip the stay in its housing.

Lower the bonnet and release it at the end of its travel.

Pull on the bonnet to check that it is secured correctly.

    See also:

    Wiper controls
    The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the climatic conditions. ...

    Changing a bulb
    The headlamps are fitted with polycarbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy w ...

    Torch
    Portable lamp, fitted in the boot wall, which can be used to light the boot or as a torch. Operation Once engaged firmly in its location, it comes on automatically when the boot is opened and ...