Changing a bulb

poly- headlamps carbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent The headlamps are fitted with poly- headlamps carbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy water,

when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals, do not touch the bulb directly with your fingers, use lint-free cloths.

done after the headlamp has been switched off for a few minutes (risk of serious Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns).

It is imperative to use only anti-ultraviolet (UV) type bulbs in order not to damage the headlamp.

Always replace a failed bulb with a new bulb with the same type and specification.

Front lamps

Model with halogen headlamps

1. Direction indicators (PY21W amber).

1. Direction indicators (PY21W amber).
2. Dipped beam headlamps (H7 - 55W).
3. Main beam headlamps (H1 - 55W).
4. Daytime running lamps / sidelamps (P21/5W)

or

Daytime running lamps / sidelamps (LEDs).

5. Foglamps (H8 - 35W).

Model with xenon and directional headlamps

1. Direction indicators (PY21W SV silver).

1. Direction indicators (PY21W SV silver).
2. Directional dipped / main beam headlamps (D1S-35W).
3. Additional main beam headlamps (H1-55W).
4. Daytime running lamps / sidelamps (P21/5W)

or

Daytime running lamps / sidelamps (LEDs).

5. Foglamps (H8-35W).

Xenon bulbs (D1S-35W) must be replaced by a PEUGEOT dealer or a qualified Risk of electrocution

Xenon bulbs (D1S-35W) must be replaced by a PEUGEOT dealer or a qualified workshop.

Changing direction indicator bulbs

Turn the bulb holder a quarter of a turn and extract it.

Turn the bulb holder a quarter of a turn and extract it.

Pull the bulb out and change it.

To refit, carry out these operations in reverse order.

such as the direction indicators, must be replaced with bulbs of identical specifications Amber or silver coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour.

cover carefully to assure the sealing of the headlamp. When refitting, close the protective cover carefully to assure the sealing of the headlamp.

Changing dipped beam headlamp bulbs

Remove the protective cover by pulling the tab.

Disconnect the bulb connector.

Spread the springs to release the bulb.

Pull the bulb out and change it.

To refit, carry out these operations in reverse order.

Changing main beam headlamp bulbs

Changing main beam headlamp bulbs

Remove the protective cover by pulling the tab.

Disconnect the bulb connector.

Compress the springs to release the bulb.

Extract the bulb and change it To refit, carry out these operations in reverse order.

Changing daytime running lamp / sidelamp bulbs

Changing daytime running lamp / sidelamp bulbs

Remove the protective cover by pulling the tab.

Disconnect the bulb connector.

Turn the bulb holder a quarter of a turn and extract it.

Pull the bulb out and change it.

To refit, carry out these operations in reverse order.

Changing integrated direction indicator side repeaters

Changing integrated direction indicator side repeaters

Insert a screwdriver at the middle of the repeater between the repeater and the

Insert a screwdriver at the middle of the repeater between the repeater and the base of the mirror.

Tilt the screwdriver to extract the repeater and remove it.

Disconnect the repeater connector.

To refit, carry out these operations in reverse order.

Contact a PEUGEOT dealer or a qualified workshop to obtain replacement repeaters.

Changing the daytime running lamps / sidelamps

For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified

For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.

Changing front foglamp bulbs

To replace these bulbs contact a PEUGEOT dealer or a qualified workshop.

To replace these bulbs contact a PEUGEOT dealer or a qualified workshop.

    See also:

    Changing a fuse
    Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

    Automatic operation of hazard warning lamps
    When braking in an emergency, depending on the deceleration, the hazard warning lamps come on automatically. They switch off automatically the first time you accelerate. You can also switch them o ...

    Peugeot 208 e-HDi Review
    The Peugeot 208 is far, far better than the 207 it replaces - and the 206 before that, come to think of it. Sorry, no keeping you on tenterhooks in this First Drive. This improvement was never goi ...