Fitting roof bars (308 saloon)

When fitting transverse roof bars, use the four quick-fit fixings provided for

When fitting transverse roof bars, use the four quick-fit fixings provided for this purpose:

 lift the concealing flaps,

open the fixing covers on each bar using the spanner,

put each fixing in place and lock them on the roof one by one,

close the fixing covers on each bar using the spanner.

roof rack, for a loading height not exceeding 40 cm (with the exception of bicycle Maximum authorised weight on the roof rack, for a loading height not exceeding 40 cm (with the exception of bicycle carriers): 80 kg.

If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the roof.

Be sure to refer to national legislation in order to comply with the regulations for transporting objects which are longer than the vehicle.

Fitting roof bars (308 SW with bench rear seat, 308 SW with individual rear

    See also:

    Dual-zone digital air conditioning
    The air conditioning can only operate with the engine running. ...

    Mats
    Removable carpet protection. Fitting When fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached. The other mats are simply placed on ...

    Remote control problem
    Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. F ...