Electric parking brake
Manual application / release
The parking brake can be applied manually by pulling the control lever A .
When the ignition is on, the parking brake can be released manually by pressing the brake pedal and pulling then releasing the control lever A .
Before getting out of the vehicle, check that the braking warning lamp ( red
) and the warning lamp P in the control lever A , are on (not flashing).
If you get out of your vehicle with the engine running, apply the parking
brake manually.
Automatic application / release
Press the accelerator and release the clutch, the parking brake is released automatically and progressively on acceleration.
When the engine is switched off , the parking brake is applied automatically.
If this warning lamp is on in the instrument panel, the automatic application/release function is deactivated .
Before getting out of the vehicle, check that the braking warning lamp ( red
) and the warning lamp P in the control lever A are on (not flashing).
Do not leave a child alone in the vehicle with the ignition on; they could
release the parking brake.
See also:
Leaving cruise control mode
Turn thumb wheel 1 to the "0" position: the cruise control mode is deselected.
The display returns to the distance recorder.
...
Manual air conditioning
The heating / ventilation or air conditioning systems can only operate with the
engine running.
1. Temperature adjustment
Turn the dial from blue (cold) to
red (hot) to adjust the temperature ...
Speed limiter "LIMIT"
1. Selecting speed limiter mode.
2. Decrease the programmed value.
3. Increase the programmed value.
4. Speed limiter On / Off.
The values must be set with the engine running. ...