Coolant temperature indicator
With the engine running, when the needle is: - in zone A , the temperature is
correct,
- in zone B , the temperature is too high; the max temperature warning lamp 1 and
the central STOP warning lamp come on, accompanied by an audible signal and a message
in the screen.
You must stop as soon as it is safe to do so.
Wait a few minutes before switching off the engine.
Contact a PEUGEOT dealer or a qualified workshop.
After driving for a few minutes, the temperature and pressure in the cooling system increase.
To top up the level: wait for the engine to cool, unscrew the cap by two turns to allow the pressure to drop, when the pressure has dropped, remove the cap, top up the level to the "MAX" mark.
See also:
General points relating to child seats
Although one of PEUGEOT's main criteria when designing your vehicle, the safety
of your children also depends on you.
For maximum safety, please observe the following recommendations:
- in acc ...
Optimised aerodynamics
The dimensions of the Peugeot 208, in particular the width (-2 cm) and the
height (-1 cm compared with the 207), its volumes which have been designed with
particular attention, the care given to e ...
Gear shift indicator
System which reduces fuel consumption by advising the driver to change up.
Operation
The system intervenes only when driving economically.
Depending on the driving situation and your vehicle's ...