Service indicator zero reset
After each service, the service indicator must be reset to zero.
The procedure for resetting to zero is as follows: switch off the ignition,
press and hold the trip distance recorder zero reset button,
switch on the ignition; the distance recorder display begins a countdown,
when the display indicates "=0" , release the button; the spanner disappears.
Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least fi ve minutes for the zero reset to be taken into account.
Retrieving the service information
You can access the service information at any time.
Press the trip distance recorder zero reset button.
The service information is displayed for a few seconds, then disappears.
See also:
Energy economy mode
System which manages the duration of use of certain functions to conserve a sufficient
level of charge in the battery.
After the engine has stopped, you can still use functions such as the audio an ...
Locations for ISOFIX child seats (308 SW with individual rear seats)
In accordance with European Regulations, this table indicates the options for
installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In the case of universal and semi ...
Electric windows
Fitted with a safety anti-pinch system and a deactivation system to prevent misuse
of the rear controls.
Electric window controls
1. Driver's electric window.
2. Passenger's electric wi ...