See also:

Changing a fuse
Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

Changing a wiper blade
Before removing a front wiper blade Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing Raise the ...

Starting using another battery
Connect the red cable to the positive terminal (+) of the flat battery A , then to the positive terminal (+) of the slave battery B. Connect one end of the green or black cable to the negati ...