Directional lighting

When the dipped or main beam headlamps are on, this function enables the light beams to provide improved lighting of the side of the road when cornering.

The use of this function, from approximately 12 mph (20 km/h) and associated with the xenon headlamps only, considerably improves the quality of your lighting when cornering.

with directional lighting

without directional lighting

without directional lighting

Programming

Programming

The function is activated or deactivated via the vehicle configuration menu.

The function is activated or deactivated via the vehicle configuration menu.

Operating fault

If a fault occurs, this warning lamp fl ashes in the instrument panel, accompanied

If a fault occurs, this warning lamp fl ashes in the instrument panel, accompanied by a message in the screen.

Contact a PEUGEOT dealer or a qualified workshop.

the function is inactive. When stationary or moving at very low speed or when reverse gear is engaged, the function is inactive.
The status of the function remains in the memory when the ignition is switched off.

    See also:

    Headlamp adjustment
    To avoid causing a nuisance to other road users, the headlamp beams should be adjusted according to the load in the vehicle. 0. 1 or 2 people in the front seats. -. Intermediate setting 1. 5 pe ...

    ISOFIX child seats recommended by PEUGEOT and approved for your vehicle
    Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide. ...

    Programming
    Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then pre ...