Installing child seats with a stay
Precautions must be taken when installing a child seat with a stay (or drop down leg). In particular, take care when there is a storage compartment present in the rear footwells.

Do not place the stay on the storage compartment cover, it could break in
a serious impact. Where the range of adjustment for the stay allows, we suggest
two other possibilities for installation.

At the bottom of the storage compartment
If the stay is long enough, you can place it in contact with the bottom of the storage compartment. Remove all objects before installing the stay.

Outside the storage compartment area
One other possibility, where the stay is long enough and can be inclined sufficiently (while observing the recommendations in the fitting instructions for the child seat), is to position the stay so that it is in contact with the floor away from the storage compartment. Remember to use the adjustment of the seat position to obtain a satisfactory position for the stay which is away from the storage compartment.
If you cannot fi t the stay in the way described, we recommend that you
do not fi t a child seat with a stay in this position.
See also:
Electric child lock
Remote control system to prevent opening of the rear doors using their interior
controls and use of the rear electric windows.
The control is located on the driver's door, with the electric win ...
12 V accessory sockets
To connect a 12 V accessory (max power: 120 Watts), remove the cover and connect
a suitable adaptor.
Exceeding the maximum power could result in damage to your accessory. ...
Running out of fuel (Diesel)
On vehicle fitted with HDi engines, the fuel system must be primed if you run
out of fuel; refer to the engine compartment view on the "Diesel engine" section.
If the tank on your vehicle ...






