Bonnet
Opening
Open the front left door.
Pull the interior bonnet release lever A , located at the bottom of the door aperture.
Push the exterior safety catch B to the left and raise the bonnet.
Unclip the stay C from its housing.
Fix the stay in the notch to hold the bonnet open.
The location of the interior bonnet release lever prevents opening of the
bonnet while the front left door is closed.
Do not open the bonnet in high winds.
When the engine is hot, handle the exterior safety catch and the bonnet stay with
care (risk of burns).
Before doing anything under the bonnet, switch off the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode.
Closing
Take the stay out of the support notch.
Clip the stay in its housing.
Lower the bonnet and release it at the end of its travel.
Pull on the bonnet to check that it is secured correctly.
See also:
Resuming manual control
Depending on your requirements, you can make a different selection from that
offered by the system by changing a setting. The other functions will still be controlled
automatically.
Press the &qu ...
Ski flap
Arrangement for storing and transporting long objects.
Opening
Lower the rear armrest.
Pull the flap handle downwards.
Lower the flap.
Load the objects from inside the boot. ...
Completely re-thought instruments and controls
Sometimes, things are noticed that seem intangible. A hatchback has 4 wheels,
a steering wheel... and through this we read the instrument panel. The history
of the motor vehicle, technical develop ...