Starting the engine
Insert the key in the ignition switch. The system recognises the starting code.
Turn the key fully towards the dashboard to position 3 (Starting).
When the engine starts, release the key.
See also:
Rear parking sensors
The system is switched on by engaging reverse gear. This is accompanied by an
audible signal. The system is switched off when you exit reverse gear.
Audible assistance
The proximity information ...
Weights and towed loads (in kg) (2)
* The weight of the braked trailer can be increased, within the GTW limit, if
the GVW of the towing vehicle is reduced by an equal amount; warning, towing using
a lightly loaded towing vehicle m ...
Memorisation
Go to the main menu by pressing MENU.
Select the "Settings" menu then "Vehicle settings".
Select the "Vehicle configuration" menu then "Memorised speeds&q ...