5-speed manual gearbox
Engaging reverse gear
Push the gear lever to the right then backwards.
Only engage reverse gear when the vehicle is stationary with the engine at idle.
As a safety precaution and to facilitate starting of the engine:
- always select neutral,
- press the clutch pedal.
Engaging 5th or 6th gear
Move the lever fully to the right to engage 5th or 6 th gear.
Engaging reverse gear
Press the gear knob trigger and move the gear lever to the left then forwards.
Only engage reverse gear when the vehicle is stationary with the engine at idle.
As a safety precaution and to facilitate starting of the engine:
- always select neutral,
- press the clutch pedal.
See also:
Moving off
Apply the parking brake.
Select position P or N.
Start the engine.
If this procedure is not followed, there is an audible signal, accompanied by
the display of an warning message.
With ...
Front map reading lamps
With the ignition on, press the corresponding switch.
Take care to avoid leaving anything in contact with the courtesy lamp. ...
Service indicator zero reset
After each service, the service indicator must be reset to zero.
The procedure for resetting to zero is as follows: switch off the ignition,
press and hold the trip distance recorder zero reset bu ...