Gear lever
R. Reverse
With your foot on the brake, move the lever forwards to select this position.
N. Neutral.
With your foot on the brake, select this position to start the engine.
A . Automated mode.
Move the lever backwards to select this mode.
M. + / - Sequential mode with manual gear changing.
Move the lever backwards, then to the left to select this mode, then:
- push forwards to change up a gear,
- or push backwards to change down a gear.
See also:
Starting the engine
Insert the key in the ignition switch. The system recognises the starting code.
Turn the key fully towards the dashboard to position 3 (Starting).
When the engine starts, release the key. ...
Interior fittings
1. Glove box (see details on the following page)
2. Large storage compartment (without audio system)
3. 12 V accessory socket (120 W)
Observe the maximum power rating to avoid damaging your acces ...
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding
system has been switched off intentionally. This is may be accompanied by an audible
signal and a message in ...