Moving off
- Select position N.
- Press the brake pedal fully.
- Start the engine.
N appears in the instrument panel.
N flashes in the instrument panel screen if the gear lever is not in position N on starting.
- Select first gear (position M or A ) or reverse (position R)
- Release the parking brake.
- Progressively take your foot off the brake pedal, then move off.
AUTO and 1 or R appear in the instrument
panel.
You must press the brake pedal while starting the engine.
Stopping - Moving off on a slope
When stopping on a slope, do not use the accelerator to immobilise the vehicle; apply the parking brake.
When moving off on a slope, accelerate gradually while releasing the parking brake.
See also:
Operating fault
With the ignition on,
the flashing of this warning lamp and the flashing of AUTO , accompanied by an audible
signal and a message in the instrument panel screen, indicates a malfunction of
the ...
Courtesy lamps
1. Front courtesy lamp
2. Map reading lamps
3. Rear side reading lamps
4. Rear courtesy lamp
Take care not to place anything in contact with the courtesy lamps.
Front and rear courtesy lamps
...
Interior mood lighting
The dimmed passenger compartment lighting improves visibility in the vehicle
when the light is poor.
Switching on
At night, the front courtesy lamp mood lamp A comes on automatically when the
...