Stopping the vehicle
Before switching off the engine, you can engage position P or N to place the gearbox in neutral. In both cases, apply the parking brake to immobilise the vehicle.
If the lever is not in position P , when the driver's door is opened or approximately 45 seconds after the ignition is switched off, a warning message appears in the screen.
Return the lever to position P; the message disappears.
See also:
Changing a wheel (308 saloon)
Procedure for changing a faulty wheel for the spare wheel using the tools provided
with the vehicle.
Access to the tools
The tools are installed in the boot under the floor.
To gain access to ...
Fuel tank
Capacity of the tank: approximately 60 litres.
Low fuel level
When the low fuel level is reached, this warning lamp comes on on the instrument
panel, accompanied by an audible signal and an aler ...
Stop & start
The Stop & Start system puts the engine temporarily on standby - STOP mode -
during stops in the traffic (red lights, traffic jams, or other...). The engine
restarts automatically - START mode ...