Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
See also:
Additional lighting
Other lamps are installed to fulfil the requirements of particular driving conditions:
- a rear foglamp to better signal the presence of the vehicle in foggy conditions,
- front foglamps with corner ...
Changing a fuse
Before changing a fuse:
the cause of the failure must be identified and rectified,
all electrical consumers must be switched off,
the vehicle must be immobilised with the ignition off,
ident ...
Stopping the vehicle
Before switching off the engine, you can change to position N to be in neutral.
In this case, you must apply the parking brake to immobilise the vehicle. ...