Hill start assist
System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal.
This function is only active when:
- the vehicle is completely stationary, with your foot on the brake pedal,
- when certain conditions of gradient are met,
- with the driver’s door closed.
The hill start assist function cannot be deactivated.
Do not leave the vehicle while it is being held in the hill start assist phase. If you need to leave the vehicle while the engine is running, apply the parking brake manually then ensure that the parking brake warning lamp is on (not flashing) in the instrument panel.
See also:
Dynamic stability control (DSC)
Activation
This system is activated automatically each time the vehicle is started.
It comes into operation in the event of a grip or trajectory problem.
This is indicated by flashing of
this wa ...
Automatic one-touch operation
To open or close the window, press or pull the switch fully: the window opens
or closes completely when the switch is released. Pressing the switch again stops
the movement of the window.
The ele ...
Service indicator
System which informs the driver when the next service is due, in accordance with
the manufacturer's servicing schedule. The point at which the service is due is
calculated from the last indica ...