Speed limiter
System which prevents the vehicle from exceeding the speed programmed by the driver. When the programmed speed limit is reached, pressing the accelerator pedal in the normal manner no longer has any effect.
The speed limiter is switched on manually: the programmed speed must be at least 20 mph (30 km/h).
The speed limiter is s witched off by manual operation of the control.
The programmed speed can be exceeded temporarily by pressing the accelerator firmly. To return to the programmed speed, simply slow down to a speed below the programmed speed.
The programmed speed remains in the memory when the ignition is switched off.
The speed limiter cannot, in any circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver.
See also:
Automatic operation
Select position D for automatic changing of the four gears.
The gearbox then operates in auto-adaptive mode, without any intervention on
the part of the driver. It continuously selects the most sui ...
Programming
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
...
Filling
A self-adhesive label on the inner face of the filler flap reminds you of the
type of fuel to use depending on your engine.
Additions of fuel must be of at least 5 litres to be registered by the ...