Exceeding the programmed speed

Pressing the accelerator pedal to exceed the programmed speed will not have any effect unless you press the pedal firmly past the point of resistance.

The speed limiter is deactivated temporarily and the programmed speed, which is still displayed, flashes.

Returning to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashing of the programmed speed.

    See also:

    Boot
    Opening After unlocking the vehicle using the remote control or the key, press the handle A and raise the tailgate Closing Close the lower tailgate. Pull the handle B downwards to guide the ...

    Stop & Start
    The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mo ...

    Removing the cartridge
    Stow the black pipe. Detach the angled base from the white pipe. Support the compressor vertically. Unscrew the cartridge from the bottom. Beware of discharges of fluid. The expiry date ...