Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE).
Set the programmed speed by accelerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)).
You can then change the programmed speed using buttons 2 and 3:
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Switch off the cruise control by pressing button 4 : the screen confirms that
it has been switched off (PAUSE).
Switch the cruise control back on by pressing button 4 again.
See also:
Trip computer
System that gives you information on the journey in progress (range, fuel consumption…). ...
Front demist - defrost
These markings on the control panel
indicate the control positions for rapid demisting or defrosting of the windscreen
and side windows.
With the heating / ventilation system
Put the temperatur ...
A triumph of touchscreens
Given that we aren’t always impressed by in-car touchscreens, this system is
one of the best we’ve used. It’s big for a start. Having projected it into the
cabin, off the dash, it’s easier to reac ...