Leaving cruise control mode
Turn thumb wheel 1 to the "0" position: the cruise control mode is deselected. The display returns to the distance recorder.





See also:
Electric parking brake
Manual application / release
The parking brake can be applied manually by pulling the control lever A .
When the ignition is on, the parking brake can be released manually by pressing
the brake ...
Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected
but is not switched on (PAUSE).
Set the programmed speed by accelerating to the required speed, then pre ...
Front map reading lamps
With the ignition on, press the corresponding switch.
Take care to avoid leaving anything in contact with the courtesy lamp. ...






