Daytime running lamps
Daytime lighting, compulsory in certain countries, which comes on automatically when the engine is started making the vehicle more visible to other users.
This function is assured:
- in countries where it is imposed by regulations, by illumination of the dipped
beam headlamps with the sidelamps and number plate lamps; this function cannot be
deactivated.
- for other countries where it is provided, by the use of dedicated lamps (bulbs
or LEDs); this function can be activated or deactivated via the vehicle configuration
menu.
The lighting control stalk must be placed in the "0" or "AUTO" (day mode) position. Deactivation of the daytime running lamps is effective after operation of the lighting control stalk or after the next engine start; activation is effective immediately.
The instruments and controls (instrument panel, multifunction screen, air conditioning control panel, ...) are not illuminated, except in night mode with manual or automatic illumination of headlamps.
See also:
General recommendations
Observe the legislation in force in your country. Ensure that the weight of the
towing vehicle is higher than that of the towed vehicle. The driver must stay at
the wheel of the towed vehicle. Dri ...
Starting-stopping the engine
With a manual gearbox , put the gear lever in neutral.
With an electronic gearbox , put the gear lever on N .
With an automatic gearbox , put the gear lever on P or N. ...
Locations for child seats secured with the seat belt
In accordance with the European regulation, this table indicates the options
for the installation of child seats secured using the seat belt and universally
approved (a) in relation to the weight ...






