Automatic rain sensitive windscreen wipers

The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall.

Switching on

Switching on

This warning lamp comes on in the instrument panel and a message is displayed. Briefly push the control stalk downwards. This warning lamp comes on in the instrument panel and a message is displayed.

Switching off

Switching off

again, or place the control stalk in another position (Int, 1 or 2). Briefly push the control stalk downwards again, or place the control stalk in another position (Int, 1 or 2).

This warning lamp goes off in the instrument panel and a message is displayed.

The automatic rain sensitive windscreen wipers must be reactivated by pushing the control stalk downwards, if the ignition has been off for more than one minute.

Operating fault

If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in intermittent mode.

Have it checked by PEUGEOT dealer or a qualified workshop.

Do not cover the rain sensor, linked with the sunshine sensor and located in the centre of the windscreen behind the rear view mirror.

Switch off the automatic rain sensitive wipers when using an automatic car wash. In winter, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers.

    See also:

    Safety anti-pinch
    When the window rises and meets an obstacle, it stops and immediately partially lowers again. In the event of unwanted opening of the window when closing automatically, press the switch until the ...

    Boot fittings (308 saloon)
    1. Rear parcel shelf (see details on following page) 2. Hooks (see details on following page) 3. Stowing rings 4. Luggage retaining strap 5. Enclosed storage tray 6. Open storage tray 7. Sto ...

    Service indicator zero reset
    After each service, the service indicator must be reset to zero. The procedure for resetting to zero is as follows: switch off the ignition, press and hold the trip distance recorder zero reset bu ...