Special position of the windscreen wipers

This position permits release of the windscreen wiper blades.
It is used for cleaning or replacement of the blades. It can also be useful, in winter, to detach the blades from the windscreen.
- Any action on the wiper stalk in the minute after switching off the ignition places the blades vertically on the screen.
- To park the blades again, switch on the ignition and operate the wiper stalk.
To maintain the effectiveness of the "flat-blade" type of wiper blades, it is advisable to:
- handle them with care,
- clean them regularly using soapy water,
- avoid using them to retain cardboard on the windscreen,
- replace them at the first signs of wear.
See also:
12 V battery
The battery does not require any maintenance. However, check that the terminals
are clean and correctly tightened, particularly in summer and winter.
When carrying out work on the battery, refer ...
Changing a wheel
Procedure for changing a faulty wheel for the spare wheel using the tools provided
with the vehicle.
Access to the tools
The tools are installed in the boot under the floor.
To gain access to t ...
Running out of fuel (diesel)
On vehicle fitted with HDi engines, the fuel system must be primed if you run
out of fuel; refer to the engine compartment view on the "Diesel engine" page.
If the tank on your vehicle is ...






