Front map reading lamps

With the ignition on, press the corresponding switch.

With the ignition on, press the corresponding switch.

Take care to avoid leaving anything in contact with the courtesy lamp.

    See also:

    Towing your vehicle
    On the front bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Place the gear lever in neutral (position N on an electronic gearbox ...

    Removing a wheel
    Parking the vehicle Immobilise the vehicle where it does not block traffic: the ground must be level, stable and not slippery. Apply the parking brake, switch off the ignition and engage first gea ...

    Screenwash fluid level
    Top up the level when necessary. Fluid specification For optimum cleaning and to avoid freezing, this fluid must not be topped up or replaced with plain water. ...