Changing a bulb
The headlamps are fitted with polycarbonate glass with a protective coating:
- do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,
- use a sponge and soapy water,
- when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals,
- do not touch the bulb directly with your fingers, use lint-free cloths.
Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns).
It is imperative to use only antiultraviolet (UV) type bulbs in order not to damage the headlamp.
Always replace a failed bulb with a new bulb with the same type and specification.
See also:
A low consumption and ultra-efficient version
Pulling together the very essence of the A9 project by reviewing every aspect
of design, the low consumption version achieves an aerodynamic performance (Cx
de 0,29 ) thanks to the optimisation of ...
Switching off
The demisting/defrosting switches off automatically to prevent an excessive consumption
of current.
It is possible to stop the demisting/ defrosting operation before it is switched
off automatica ...
High level safety on al co unts
Whether in terms of primary, secondary or tertiary safety, the new 308 is
positioned at the highest level.
Firstly, the excellent rigidity of the structure ensures optimal operation of
the wheel ...