Access to the tools
The extraction tweezer is fitted to the back of the fusebox cover located inside the glove box.
- Open the glove box lid,
- unclip the fusebox cover by pulling at the top right,
- disengage the cover completely and turn it over,
remove the carrier on which the tweezer is fitted.
See also:
Switching the engine off
Immobilise the vehicle.
Turn the key fully towards you to position 1 (Stop) .
Remove the key from the ignition switch.
Free wheeling
For safety reasons, do not free wheel. If free wheeling, ...
Interior fittings
1. Glove box (see details on the following page)
2. Large storage compartment (without audio system)
3. 12 V accessory socket (120 W)
Observe the maximum power rating to avoid damaging your acces ...
Stop & start
The Stop & Start system puts the engine temporarily into standby - STOP mode
- during stops in the traffi c (red lights, traffi c jams, or other...). The engine
restarts automatically - START ...