See also:

Removal
To remove the mat on the driver's side: move the seat as far back as possible, unclip the fixings, remove the mat. Refitting To refit the mat on the driver's side: position the ...

Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then pre ...

Reinitialisation
Following disconnection of the battery, the gearbox must be reinitialised. Switch on the ignition. AUTO , 􀀷 and - appear in the instrument panel. Select position N. Press the brake ped ...