Battery
Procedure for charging your battery when it is flat or for starting the engine using another battery.
The presence of this label indicates the use of a 12 V lead-acid battery with special technology and specification, for which the involvement of a PEUGEOT dealer or qualified workshop is required when replacing or disconnecting the battery. Failure to observe this recommendation may cause premature wear of the battery.
After refitting the battery, the Stop & Start system will only be active after several hours depending on the climatic conditions and the state of charge of the battery (up to about 8 hours).
See also:
Weights and towed loads (in kg) (2)
* The weight of the braked trailer can be increased, within the GTW limit, if
the GVW of the towing vehicle is reduced by an equal amount; warning, towing using
a lightly loaded towing vehicle m ...
A triumph of touchscreens
Given that we aren’t always impressed by in-car touchscreens, this system is
one of the best we’ve used. It’s big for a start. Having projected it into the
cabin, off the dash, it’s easier to reac ...
Starting the vehicle
Insert the key in the ignition switch.
The system recognises the starting code.
Turn the key fully towards the dashboard to position 3 (Starting) .
When the engine starts, release the key.
...