1.4 litre HDi engine

  • Fill the fuel tank with at least five litres of diesel.
  • Open the bonnet.
  • Press and release the priming pump until resistance is felt (there may be resistance on the first press).
  • Operate the starter until the engine starts.
  • Close the bonnet.
    See also:

    Instrument panels
    On switching on, the dial needles go to the extent of their travel then return to 0. A. With the ignition on, the needle should indicate the fuel remaining. B. With the engine running, the assoc ...

    Operation
    Going into engine STOP mode The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby: - with a manual gearbox , at speeds below 12 mph (20 km/h), when yo ...

    Closing
    Take the stay out of its support slot. Clip the stay back into its housing. Lower the bonnet and release it at the end of its travel. Pull on the bonnet to check that it has latched correctly ...