1.6 litre HDi engine

  • Fill the fuel tank with at least five litres of diesel.
  • Open the bonnet.
  • If necessary, unclip the styling cover for access to the priming pump.
  • Squeeze and release the priming pump repeatedly until resistance is felt (there may be resistance at the first press).
  • Operate the starter until the engine starts (if the engine does not start at the first attempt, wait around 15 seconds before trying again).
  • If the engine does not start after a few attempts, operate the priming pump again then start the engine.
  • Clip the styling cover back in place.
  • Close the bonnet.
    See also:

    Steering wheel adjustment
    1. Release the adjustment mechanism. 2. Adjust for height and reach. 3. Lock the adjustment mechanism. For reasons of safety, these operations must only be carried out with the vehicle stationa ...

    Removal
    To remove the mat on the driver's side: move the seat as far back as possible, unclip the fixings, remove the mat. Refitting To refit the mat on the driver's side: position the ...

    Grip control
    Special patented traction control system which improves traction on snow, mud and sand. This system is combined with all-season M+S (Mud and Snow: 215/60 R16) tyres which offer an excellent compr ...