Coolant temperature gauge
With the engine running, when the needle is:
- in zone A , the temperature is correct,
- in zone B, the temperature is too high; the maximum temperature and the central
STOP warning lamps come on, accompanied by an audible signal and a warning message
in the screen.
You MUST stop as soon as it is safe to do so.
Wait a few minutes before switching off the engine.
Contact a PEUGEOT dealer or a qualified workshop.
After driving for a few minutes, the temperature and pressure in the cooling system increase.
To top up the level:
wait for the engine to cool,
unscrew the cap slightly to allow the pressure to drop,
when the pressure has dropped, remove the cap,
top up the level to the "MAX" mark.
Be aware of the risk of burns when topping up the cooling system. Do not fill above the maximum level (indicated on the reservoir).
See also:
Travelling abroad
As Diesel fuel pump nozzles may be different in other countries, the presence
of the misfuel prevention device may make refuelling impossible. Before travelling
abroad, we recommend that you check ...
Towing the vehicle (308 SW with bench rear seat, 308 SW with individual rear
seats)
Procedure for having your vehicle towed or for towing another vehicle using a
removable towing eye.
Access to the tools
The towing eye is installed in the lefthand side trim of the boot.
To ...
Interior welcome lighting
The remote switching on of the passenger compartment lighting makes your entry
into the vehicle easier in poor light. It is activated in accordance with the light
intensity detected by the brightn ...