Touch screen

Press MENU to display the MAIN MENU then select " Settings".

Press MENU to display the MAIN MENU then select " Settings".

Select "System configuration".

Select "System configuration".

Select "Date & Time".

Select "Date & Time".

Select the date or time displayed, use the keypad to adjust the setting, then

Select the date or time displayed, use the keypad to adjust the setting, then "Confirm".

    See also:

    Triggering of the alarm
    This is indicated by sounding of the siren and flashing of the direction indicators for thirty seconds. The monitoring functions remain active until the alarm has been triggered eleven times in s ...

    Rear parking sensors
    The system is switched on by engaging reverse gear. This is accompanied by an audible signal. The system is switched off when you exit reverse gear. Audible assistance The proximity information ...

    Towing another vehicle
    On the rear bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on both vehicles. Move off gently ...