Automatic one-touch operation
To open or close the window, press or pull the switch fully: the window opens or closes completely when the switch is released. Pressing the switch again stops the movement of the window.
The electric window switches remain operational for approximately one minute after the key has been removed from the ignition. Once this time has elapsed, the electric windows will not operate. To reactivate them, switch the ignition on again.
See also:
Changing a bulb
The headlamps are fitted with
poly- headlamps carbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent
product, use a sponge and ...
12 V accessory sockets
To connect a 12 V accessory (max power: 120 Watts), remove the cover and connect
a suitable adaptor.
Exceeding the maximum power could result in damage to your accessory. ...
Changing a fuse
Before changing a fuse:
the cause of the failure must be identified and rectified,
all electrical consumers must be switched off,
the vehicle must be immobilised with the ignition off,
ident ...