Service overdue

For 5 seconds after the ignition is switched on, the spanner fl ashes to indicate that the service must be carried out as soon as possible.

Example: the service is overdue by 186 miles (300 km).

For 5 seconds after the ignition is switched on, the screen indicates:

5 seconds after the ignition is switched on, the distance recorder resumes its

5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on .

The distance remaining may be weighted by the time factor, depending on

the driving conditions. The distance remaining may be weighted by the time factor, depending on the driving conditions.

Therefore, the spanner may also come on if you have exceeded the two year service interval.

    See also:

    Switching the engine off
    Immobilise the vehicle. Turn the key fully towards you to position 1 (Stop) . Remove the key from the ignition switch. Free wheeling For safety reasons, do not free wheel. If free wheeling, ...

    Instrument panels
    On switching on, the dial needles go to the extent of their travel then return to 0. A. With the ignition on, the needle should indicate the fuel remaining. B. With the engine running, the assoc ...

    Changing a wiper blade
    Before removing a front wiper blade Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing Raise the cor ...