Height

Pull the control upwards to raise or push it downwards to lower, as many times as required, to obtain the position required.
See also:
Changing a fuse
Before changing a fuse:
the cause of the failure must be identified and rectified,
all electrical consumers must be switched off,
the vehicle must be immobilised with the ignition off,
ident ...
Tyre under-inflation detection
System which automatically and continuously checks the pressure of the tyres
while driving.
Sensors fitted in each valve trigger a warning in the event of problem (speed
above 12 mph (20 km/h)) ...
1.4 litre HDi engine
Fill the fuel tank with at least five litres of diesel.
Open the bonnet.
Press and release the priming pump until resistance is felt (there may be
resistance on the first press).
Operate t ...






