Changing a wiper blade
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen.
Removing
- Raise the corresponding wiper arm.
- Unclip the wiper blade and remove it.
Fitting
- Put the corresponding new wiper blade in place and clip it.
- Fold down the wiper arm carefully.
After fitting a front wiper blade
- Switch on the ignition.
- Operate the wiper stalk again to park the wiper blades.
See also:
Steering mounted controls
+. Change up paddle.
Press the back of the steering wheel "+" paddle to change up a gear.
- . Change down paddle.
Press the back of the steering wheel "-" paddle to change dow ...
Running out of fuel (diesel)
On vehicle fitted with HDi engines, the fuel system must be primed if you run
out of fuel; refer to the corresponding engine compartment view.
1.6 litre HDi engine
Fill the fuel tank with at lea ...
Memorising speeds
This memorisation of speeds applies to both the speed limiter and the cruise
control. You can memorise up to 5 speed settings in the system. By default, a few
speeds are already memorised. ...