Secondary control
For mechanically locking and unlocking the doors in the event of a fault with the central locking system or a battery failure.
See also:
Trip reset
When the desired trip
is displayed, press the reset zone, located at bottom right of the touch screen.
Trips "1" and "2" are independent but their use is identical.
For examp ...
Stop & Start
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...
Memorisation
Go to the main menu by pressing MENU.
Select the "Settings" menu then "Vehicle settings".
Select the "Vehicle configuration" menu then "Memorised speeds&q ...