Front demist - defrost
These markings on the control panel
indicate the control positions for rapid demisting or defrosting of the windscreen
and side windows.
With the heating / ventilation system
Put the temperature and air flow controls to the dedicated marked position.
Put the air intake control to the "Exterior air intake" position (control indicator lamp off).
Put the air distribution control to the "Windscreen" position.
With manual air conditioning
Put the temperature, air flow and distribution controls to the dedicated marked position.
Put the air intake control to the "Exterior air intake" position (indicator lamp on the control off).
Switch on the air conditioning by pressing the "A/C" button; the warning lamp in the button comes on.
With Stop & Start, when the demisting,
air conditioning and air flow functions are activated, STOP mode is not available.
See also:
Temporary puncture repair kit
Complete system consisting of a compressor and a sealant cartridge which permits
temporary repair of a tyre so that you can drive to the nearest garage. It is designed
to repair most punctures whi ...
Interior welcome lighting
The remote switching on of the passenger compartment lighting makes your entry
into the vehicle easier in poor light. It is activated in accordance with the light
intensity detected by the brightn ...
12 V accessory socket
To connect a 12 V accessory (maximum power: 120 Watts), lift the cover and connect
a suitable adaptor. ...