Steering wheel adjustment

When stationary , pull the control lever to release the adjustment mechanism.

When stationary , pull the control lever to release the adjustment mechanism.

Adjust the height and reach to suit your driving position.

Push the control lever to lock the adjustment mechanism.

operations should only be carried out while the vehicle is stationary. As a safety precaution, these operations should only be carried out while the vehicle is stationary.

    See also:

    Changing a fuse
    Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

    Opening
    After unlocking the boot or the vehicle using the remote control or the key, press the opening control, then raise the tailgate. ...

    Stop & start
    The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffi c (red lights, traffi c jams, or other...). The engine restarts automatically - START ...