Mats
Removable carpet protection.
Fitting
When fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached.
The other mats are simply placed on the carpet.
Removal
To remove the mat on the driver's side:
move the seat as far back as possible,
unclip the fixings,
remove the mat.
Refitting
To refit the mat on the driver's side:
position the mat correctly,
refit the fixings by pressing,
check that the mat is secured correctly.
To avoid any risk of jamming of
the pedals:
- only use mats which are suited to the fixings already present in the vehicle;
these fixings must be used,
- never fit one mat on top of another.
The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control / speed limiter.
See also:
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel and/or
instrument panel screen, this confirms that the corresponding system has come into
operation.
...
Diesel weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of
1 000 metres; the towed load mentioned must be reduced by 10 % for each additional
1 000 metres of altitude.
The sp ...
Fitting roof bars
When fitting transverse roof bars, take care to position them correctly on the
retaining pins located in the door apertures.
Use accessories recommended by PEUGEOT observing the manufacturer' ...