Location of child seats secured using the seat belt
In accordance with the European regulation, this table indicates the options for the installation of child seats secured using the seat belt and universally approved (a) depending on the weight of the child and the seat in the vehicle.
(a) Universal child seat: child seat which can be installed in all vehicles using
the seat belt.
(b) Group 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed
on the front passenger seat.
(c) Consult the current legislation in your country before installing your child
on this seat.
U : seat suitable for the installation of a child seat secured using the seat belt and universally approved, "rear facing"
and/or "forwards facing".
U(R1) : identical to U , with the vehicle's seat adjusted to the intermediate
longitudinal position.
U(R2) : identical to U , with the vehicle's seat adjusted to its highest position and moved back fully.
See also:
Exiting economy mode
These functions are reactivated automatically next time the vehicle is driven.
To restore these functions immediately, start the engine and let it run for at
least five minutes.
A flat battery pre ...
Programming
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
...
Lighting controls
System for selection and control of the various front and rear lamps providing
the vehicle's lighting and signalling. ...