Welcome lighting
When the light is poor, detected by a sensor, the remote switching on of the dipped headlamps and sidelamps makes your approach to the vehicle easier.
This function can be programmed via the configuration menu.
See also:
Changing a wiper blade
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to
position the wiper blades vertically on the windscreen.
Removing
Raise the ...
Airbags
System designed to maximise the safety of the occupants (with the exception of
the rear centre passenger) in the event of violent collisions. It supplements the
action of the force-limiting seat b ...
Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected
but is not switched on (PAUSE).
Set the programmed speed by accelerating to the required speed, then pre ...