See also:

Towing another vehicle
On the rear bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on both vehicles. Move off gently ...

Trip reset
When the desired trip is displayed, press the reset zone, located at bottom right of the touch screen. Trips "1" and "2" are independent but their use is identical. For examp ...

Engine oil level indicator
System which informs the driver whether the engine oil level is correct or not. This information is indicated for a few seconds when the ignition is switched on, after the service information. Th ...