Mats

Removable carpet protection.

Fitting

Fitting

When fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached.

The other mats are simply placed on the carpet.

Removal

To remove the mat on the driver's side:

move the seat as far back as possible,
unclip the fixings,
remove the mat.

Refitting

To Refit the mat on the driver's side:

position the mat correctly,
Refit the fixings by pressing,
check that the mat is secured correctly.

- only use mats which are suited to the fixings already present in the vehicle; To avoid any risk of jamming of the pedals:
- only use mats which are suited to the fixings already present in the vehicle; these fixings must be used,
- never fi t one mat on top of another.

The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control / speed limiter.

    See also:

    Remote control problem
    Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. F ...

    Load reduction mode
    System which manages the use of certain functions according to the level of charge remaining in the battery. When the vehicle is being driven, the load reduction function temporarily deactivates ...

    Service indicator zero reset
    After each service, the service indicator must be reset to zero. The procedure for resetting to zero is as follows: switch off the ignition, press and hold the trip distance recorder zero reset bu ...