Locations for installing ISOFIX child seats

In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.

In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G , is indicated on the child seat next to the ISOFIX logo.

IUF: seat suitable for the installation of an Isofix Universal seat, " Forwards-facing"

IUF: seat suitable for the installation of an Isofix Universal seat, " Forwards-facing" secured using the top belt.

IL-SU: seat suitable for the installation of an Isofix Semi- Universal seat either:

- "rearwards-facing" fitted with a top belt or a stay,
- "forwards-facing" fitted with a stay,
- a shell seat fitted with an upper strap or a stay.

For advice on securing the top belt, refer to the section on "Isofix mountings".

X: seat not suitable for the installation of a child seat or shell for the weight group indicated.

* Child seats with a stay (or drop down leg) should be fitted to your vehicle with care. Refer to the section on fitting a child seat with a stay.

    See also:

    Switch panel
    Illumination of the lamp indicates the status of the corresponding function. A. Deactivation of rear parking sensors. B. Deactivation of the DSC/ASR system. C. Deactivation of the Stop & Star ...

    Operating fault
    In the event of a fault with the system, the "ECO OFF" switch warning lamp flashes then comes on continuously. Have it checked by a PEUGEOT dealer or a qualified workshop. In the event ...

    Closing
    Take the stay out of its support slot. Clip the stay back into its housing. Lower the bonnet and release it at the end of its travel. Pull on the bonnet to check that it has latched correctly ...